FN12-12(D)T630-20 Indoor High-Voltage Pressure-Operated Load Switch

1.1 Used in the 10kV and below three-phase power distribution system for control and protection of power equipment such as transformer, cables, and overhead lines, especially suitable for terminal substations and box-type substations used in urban network and rural network and for control and protection of ring network and dual radiant power supply unit.

1.2 FN12-12(D)/T630-20 indoor high-voltage pressure-operated load switch can be used to turn on / off the load current.

1.3 FN12-12R (D)/T125-31.5 indoor high-voltage pressure-operated load switch – fuse-combination unit can be used to turn on / off the load current, the overload current, and the breaking line short-circuit current.

Working environment conditions:

1.1 Ambient temperature: Upper limit: +40ºC; Lower limit: -15ºC;

1.2 The altitude does not exceed 1000m.

1.3 For relative air humidity, the daily mean is not greater than 95%, and the monthly mean is not greater than 90%;

1.4 The earthquake intensity does not exceed 8 degrees.

1.5 Installed in places free of fire, explosive risk, chemical corrosion, and violent vibration.

1.6 The installation site shall be free of flammable substance, explosive risk, chemical corrosion and violent vibration.